RAP-300-1U MMMM
RAM-B-174URAM-B-149ZURAM-B-176

Magnetic Platform for Radar Detectors & Other Devices- RAM

From: $14.95

Radar Detector platform from RAM Mounts. Select your mount from the Drop Down Menu.

Clear selection
SKU: RAM RAP-300-1U. Categories: , , .

Product Description

NOTE: Magnets can be removed allowing use of Velcro, if preferred.

The RAP-300-1U, RAM Magnetic Power Plate III, is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets, composite cradle and one adhesive metal plate.  To mount your device to the magnet, you will need to attach the metal plate to the back of your device using the double-sided tape provided.  Includes a rectangular 50mm x 38mm x 0.08mm thick metal plate with adhesive back.

Additional steel backing plates for devices available RAP-300-1SU

Includes mounting hardware (nuts & bolts) to attach to any RAM, ADAPTIV or TECHMOUNT mount.

Dimensions: 4″ X 3″ X 1/2″. (10cm. X 8cm. X 1cm.)

Material: High Strength Composite

Note: The magnetic mount should NOT be used to hold any device that has an internal hard drive.  The magnet may damage the drive.  This includes the Apple iPod (Version 1) and other small battery operated devices.

Select your mount from the Drop Down Menu.

Control Mount

The RAM-B-174 consists of a 1″ diameter rubber ball, double-socket arm, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5″ to 1.25″ in diameter. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts.  Designed into the mount is a 1″ diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm. With a twist of the thumb knob, the mount can be loosened to move the mount to your optimum viewing position.

Included with Purchase:

  • (1 qty) Base/ball adaptor (attaches directly to cradle)
  • (1 qty) Standard size double socket arm
  • (1 qty) Mounting base (mounts to either brake/clutch reservoir or rail/handlebar)
  • Hardware for mounting to either brake/clutch reservoir or rail/handlebar

RAM 309 Series Control Mount Instructions

Handlebar Mount

The zinc-coated u-bolt base makes attaching to handlebars, tubing, or railing a breeze.  Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.  High quality materials insure your device is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device.  Included in this package is hardware that accommodates bars from 0.50″ to 1.25″ in diameter.

This kit includes the handlebar base (231ZU), the double socket arm (201U) and the d-ball adapter (238U).

RAM 149 & 231 Handlebar Mount Instructions

Stem Mount

The RAM-B-176U consists of a fork stem motorcycle base, double socket arm and diamond base adapter.  The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.  The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm allowing for almost infinite adjustment and perfect viewing angles.  The fork stem base is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit.

This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5” – 1.10” at the following intervals:

Metric Standard

  • 12mm .5”
  • 14mm .55”
  • 16mm .63”
  • 18mm .71”
  • 20mm .79”
  • 28mm 1.10”

Note: RAM recommends that you review the installation instructions for this part prior to ordering.

RA 176 & 342 Stem Mount Installation Instructions

Reviews

There are no reviews yet, would you like to submit yours?

Be the first to review “Magnetic Platform for Radar Detectors & Other Devices- RAM”

*

Product Enquiry